This 50mm gear lever extension is designed to be used when body lifting a vehicle to raise the gear ..

These heavy duty Jimny radius arm mount guards are CAD designed, laser cut and CNC folded in 4mm ste..

The stock transfer case mounting arms on the Jimny are a lightweight cast aluminium part and are pro..

These heavy duty Jimny radius arm mount guards are CAD designed, laser cut and CNC folded in 4mm ste..

Suzuki Jimny rear shock relocation spacers / extensions. These shock relocation extensions extend..

This kit is used to mount a Suzuki Samurai / SJ / Sierra transfer case in your jimny. It allows y..

Protect the underside of your Jimny with our ultra-strong transfer case guard. The transfer case ..

Our new oil pickup adaptor bush is a custom made rubber bush designed to make life easier when swapp..

Brand new replacement clutch cable. Fits Suzuki SJ413, Samurai, Sierra, SJ80...

This thermostat housing is used on the back of the head on G13B GTI and G16b Baleno engine conv..

Brand new replacement speedo cable. Fits Suzuki SJ410, SJ413, Samurai, Sierra, SJ80...

These are bolt in heavy duty replacement transfer case mounting arms to suit a Suzuki Samurai, ..

This transfer case shifter sheet bush is CNC machined from lubricated nylon for a perfect fit a..

Our driveshaft spacers are a great way to correct the spline engagement on your drive shaft aft..

These upgraded hub bolts are 12.9 grade and zinc plated for maximum strength and corrosion..

Suzuki axle housings are very thin and prone to bending when used hard off-road.  Our diff trus..

Protect your Samurai / SJ413 / Sierra fuel tank with one of our awesome fuel tank guards. The fue..

Protect your diff centre from dents and holes with our heavy duty diff guard designed to h..

Protect your diff centre from dents and holes with our heavy duty diff guard designed to h..

If you've already trussed your axle with our axle truss, the point where the knuckle ball joins the ..

Brand new Suzuki oil pickup from the G13B 1300 engine.  Great if you are doing a G16A or G16B e..

A pair of new handbrake shoes for the standard transfer case mounted hand brake drum found on early ..

Suzuki Vitara and Grand Vitara rear shock relocation spacers / extensions. These shock relocation..

This nylon support bush is a fix developed by Suzuki as a fix for oil leaks and axle shaft movement ..

This oil seal fits the front differentail housing on Suzuki Vitaras and Grand Vitaras where the CV a..

These CNC machined, zinc plated strut extensions or strut spacers are a great economical w..

When lifting the front of a Vitara, a common problem is an increase in positive camber – where the t..

This 50mm rear diff balljoint / heim spacer goes between the upper a-arm balljoint and the rear..

The steering idler arm on the Vitara / Escudo is notoriously weak, and the added loads from bigger t..

This 50mm gear lever extension is designed to be used when body lifting a vehicle to raise the gear ..

Show your support for ZUKPARTS.COM with one of our awesome T-shirts...