If you have the dreaded Jimny death wobble at about 80km and you've checked the obvious things like wheel balance, brake rotor warpage and panhard bushes then these shims could be just what you need.

Developed by Suzuki as a fix for the wobble, these shims are installed to provide additional preload on the kingpin bearings, which increases resistance to turning and dampens out wobbles.

Kit contains 12 shims of 0.2mm, 0.5mm and 1mm thickness, allowing various combinations of thickness to adjust the kingpin preload.

Fits JB33, JB43, and JB74 Jimny from 1998 - current.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: